In geometry, a polygon is a plane figure bounded by a finite sequence of line segments, a twodimensional polytope.
The line segments that make up the polygon are called sides; their intersections are called vertices.
In geometry a polygon (Template:Pronen or Template:IPAlinken) is traditionally a plane figure that is bounded by a closed path or circuit, composed of a finite sequence of straight line segments (i.e., by a closed polygonal chain). These segments are called its edges or sides, and the points where two edges meet are the polygon's vertices or corners. The interior of the polygon is sometimes called its body. A polygon is a 2dimensional example of the more general polytope in any number of dimensions.
The word "polygon" derives from the Greek πολύς ("many") and γωνία (gōnia), meaning "knee" or "angle". Today a polygon is more usually understood in terms of sides.
Usually two edges meeting at a corner are required to form an angle that is not straight (180°); otherwise, the line segments will be considered parts of a single edge.
The basic geometrical notion has been adapted in various ways to suit particular purposes. For example in the computer graphics (image generation) field, the term polygon has taken on a slightly altered meaning, more related to the way the shape is stored and manipulated within the computer.
Contents
Classification
Number of sides
Polygons are primarily classified by the number of sides, see naming polygons below.
Convexity
Polygons may be characterised by their degree of convexity:
 Convex: any line drawn through the polygon (and not tangent to an edge or corner) meets its boundary exactly twice.
 Nonconvex: a line may be found which meets its boundary more than twice.
 Simple: the boundary of the polygon does not cross itself. All convex polygons are simple.
 Concave: Nonconvex and simple.
 Starshaped: the whole interior is visible from a single point, without crossing any edge. The polygon must be simple, and may be convex or concave.
 Selfintersecting: the boundary of the polygon crosses itself. Branko Grünbaum calls these coptic, though this term does not seem to be widely used. The term complex is sometimes used in contrast to simple, but this risks confusion with the idea of a complex polygon as one which exists in the complex Hilbert plane consisting of two complex dimensions.
 Star polygon: a polygon which selfintersects in a regular way.
Symmetry
 Equiangular: all its corner angles are equal.
 Cyclic: all corners lie on a single circle.
 Isogonal or vertextransitive: all corners lie within the same symmetry orbit. The polygon is also cyclic and equiangular.
 Equilateral: all edges are of the same length. (A polygon with 5 or more sides can be equilateral without being convex.) (Williams 1979, pp. 3132)
 Isotoxal or edgetransitive: all sides lie within the same symmetry orbit. The polygon is also equilateral.
 Regular. A polygon is regular if it is both cyclic and equilateral. A nonconvex regular polygon is called a regular star polygon.
Miscellaneous
 Rectilinear: a polygon whose sides meet at right angles, i.e., all its interior angles are 90 or 270 degrees.
 Monotone with respect to a given line L, if every line orthogonal to L intersects the polygon not more than twice.
Properties
We will assume Euclidean geometry throughout.
Angles
Any polygon, regular or irregular, selfintersecting or simple, has as many corners as it has sides. Each corner has several angles. The two most important ones are:
 Interior angle  The sum of the interior angles of a simple gon is radians or degrees. This is because any simple gon can be considered to be made up of triangles, each of which has an angle sum of radians or 180 degrees. The measure of any interior angle of a convex regular gon is radians or degrees. The interior angles of regular star polygons were first studied by Poinsot, in the same paper in which he describes the four regular star polyhedra.
 Exterior angle  Imagine walking around a simple gon marked on the floor. The amount you "turn" at a corner is the exterior or external angle. Walking all the way round the polygon, you make one full turn, so the sum of the exterior angles must be 360°. Moving around an ngon in general, the sum of the exterior angles (the total amount one "turns" at the vertices) can be any integer multiple of 360°, e.g. 720° for a pentagram and 0° for an angular "eight", where is the density or starriness of the polygon. See also orbit (dynamics).
The exterior angle is the supplementary angle to the interior angle. From this the sum of the interior angles can be easily confirmed, even if some interior angles are more than 180°: going clockwise around, it means that one sometime turns left instead of right, which is counted as turning a negative amount. (Thus we consider something like the winding number of the orientation of the sides, where at every vertex the contribution is between −½ and ½ winding.)
Area and centroid
The area of a polygon is the measurement of the 2dimensional region enclosed by the polygon. For a nonselfintersecting (simple) polygon with vertices, the area and centroid are given by:^{[1]}
To close the polygon, the first and last vertices are the same, i.e., . The vertices must be ordered clockwise or counterclockwise; if they are ordered clockwise, the area will be negative but correct in absolute value. This is commonly called the Surveyor's Formula.Template:Fix/category^{[citation needed]}
The formula was described by MeisterTemplate:Fix/category^{[citation needed]} in 1769 and by Gauss in 1795. It can be verified by dividing the polygon into triangles, but it can also be seen as a special case of Green's theorem.
The area A of a simple polygon can also be computed if the lengths of the sides, a_{1},a_{2}, ..., a_{n} and the exterior angles, are known. The formula is
The formula was described by Lopshits in 1963.^{[2]}
If the polygon can be drawn on an equallyspaced grid such that all its vertices are grid points, Pick's theorem gives a simple formula for the polygon's area based on the numbers of interior and boundary grid points.
If any two simple polygons of equal area are given, then the first can be cut into polygonal pieces which can be reassembled to form the second polygon. This is the BolyaiGerwien theorem.
For a regular polygon with n sides of length s, the area is given by:
Through the area of a triangle
The area of a polygon can sometimes be found by multiplying the area of a triangle by therefore the following formulas are:
Selfintersecting polygons
The area of a selfintersecting polygon can be defined in two different ways, each of which gives a different answer:
 Using the above methods for simple polygons, we discover that particular regions within the polygon may have their area multiplied by a factor which we call the density of the region. For example the central convex pentagon in the centre of a pentagram has density 2. The two triangular regions of a crossquadrilateral (like a figure 8) have oppositesigned densities, and adding their areas together can give a total area of zero for the whole figure.
 Considering the enclosed regions as point sets, we can find the area of the enclosed point set. This corresponds to the area of the plane covered by the polygon, or to the area of a simple polygon having the same outline as the selfintersecting one (or, in the case of the crossquadrilateral, the two simple triangles).
Degrees of freedom
An ngon has degrees of freedom, including 2 for position, 1 for rotational orientation, and 1 for overall size, so for shape. In the case of a line of symmetry the latter reduces to .
Let k ≥ 2. For an nkgon with kfold rotational symmetry (C_{k}), there are degrees of freedom for the shape. With additional mirrorimage symmetry (D_{k}) there are degrees of freedom.
Other formulas
The sector area of a polygon is:
The spiral length of a polygon is:
The arc length of a polygon is:
Generalizations of polygons
In a broad sense, a polygon is an unbounded (without ends) sequence or circuit of alternating segments (sides) and angles (corners). An ordinary polygon is unbounded because the sequence closes back in itself in a loop or circuit, while an apeirogon (infinite polygon) is unbounded because it goes on for ever so you can never reach any bounding end point. The modern mathematical understanding is to describe such a structural sequence in terms of an 'abstract' polygon which is a partially ordered set (poset) of elements. The interior (body) of the polygon is another element, and (for technical reasons) so is the null polytope or nullitope.
A geometric polygon is understood to be a 'realization' of the associated abstract polygon; this involves some 'mapping' of elements from the abstract to the geometric. Such a polygon does not have to lie in a plane, or have straight sides, or enclose an area, and individual elements can overlap or even coincide. For example a spherical polygon is drawn on the surface of a sphere, and its sides are arcs of great circles. So when we talk about "polygons" we must be careful to explain what kind we are talking about.
A digon is a closed polygon having two sides and two corners. On the sphere, we can mark two opposing points (like the North and South poles) and join them by half a great circle. Add another arc of a different great circle and you have a digon. Tile the sphere with digons and you have a polyhedron called a hosohedron. Take just one great circle instead, run it all the way round, and add just one "corner" point, and you have a monogon or henagon  although many authorities do not regard this as a proper polygon.
Other realizations of these polygons are possible on other surfaces  but in the Euclidean (flat) plane, their bodies cannot be sensibly realized and we think of them as degenerate.
The idea of a polygon has been generalized in various ways. Here is a short list of some degenerate cases (or special cases, depending on your point of view):
 Digon. Interior angle of 0° in the Euclidean plane. See remarks above re. on the sphere.
 Interior angle of 180°: In the plane this gives an apeirogon (see below), on the sphere a dihedron
 A skew polygon does not lie in a flat plane, but zigzags in three (or more) dimensions. The Petrie polygons of the regular polyhedra are classic examples.
 A spherical polygon is a circuit of sides and corners on the surface of a sphere.
 An apeirogon is an infinite sequence of sides and angles, which is not closed but it has no ends because it extends infinitely.
 A complex polygon is a figure analogous to an ordinary polygon, which exists in the complex Hilbert plane.
Naming polygons
The word 'polygon' comes from Late Latin polygōnum (a noun), from Greek polygōnon/polugōnon πολύγωνον, noun use of neuter of polygōnos/polugōnos πολύγωνος (the masculine adjective), meaning "manyangled". Individual polygons are named (and sometimes classified) according to the number of sides, combining a Greekderived numerical prefix with the suffix gon, e.g. pentagon, dodecagon. The triangle, quadrilateral or quadrangle, and nonagon are exceptions. For large numbers, mathematicians usually write the numeral itself, e.g. 17gon. A variable can even be used, usually ngon. This is useful if the number of sides is used in a formula.
Some special polygons also have their own names; for example the regular star pentagon is also known as the pentagram.
Name  Edges  Remarks 

henagon (or monogon)  1  In the Euclidean plane, degenerates to a closed curve with a single vertex point on it. 
digon  2  In the Euclidean plane, degenerates to a closed curve with two vertex points on it. 
triangle (or trigon)  3  The simplest polygon which can exist in the Euclidean plane. 
quadrilateral (or quadrangle or tetragon)  4  The simplest polygon which can cross itself. 
pentagon  5  The simplest polygon which can exist as a regular star. A star pentagon is known as a pentagram or pentacle. 
hexagon  6  
heptagon  7  avoid "septagon" = Latin [sept] + Greek 
octagon  8  
enneagon (or nonagon)  9  
decagon  10  
hendecagon  11  avoid "undecagon" = Latin [un] + Greek 
dodecagon  12  avoid "duodecagon" = Latin [duo] + Greek 
tridecagon (or triskaidecagon)  13  
tetradecagon (or tetrakaidecagon)  14  
pentadecagon (or quindecagon or pentakaidecagon)  15  
hexadecagon (or hexakaidecagon)  16  
heptadecagon (or heptakaidecagon)  17  
octadecagon (or octakaidecagon)  18  
enneadecagon (or enneakaidecagon or nonadecagon)  19  
icosagon  20  
No established English name  100  "hectogon" is the Greek name (see hectometre), "centagon" is a LatinGreek hybrid; neither is widely attested. 
chiliagon  1000  Pronounced Template:IPAlinken), this polygon has 1000 sides. The measure of each angle in a regular chiliagon is 179.64°.
René Descartes used the chiliagon and myriagon (see below) as examples in his Sixth meditation to demonstrate a distinction which he made between pure intellection and imagination. He cannot imagine all thousand sides [of the chiliagon], as he can for a triangle. However, he clearly understands what a chiliagon is, just as he understands what a triangle is, and he is able to distinguish it from a myriagon. Thus, he claims, the intellect is not dependent on imagination.^{[3]} 
myriagon  10,000  See remarks on the chiliagon. 
megagon ^{[4]}  1,000,000  The internal angle of a regular megagon is 179.99964 degrees. 
To construct the name of a polygon with more than 20 and less than 100 edges, combine the prefixes as follows
Tens  and  Ones  final suffix  

kai  1  hena  gon  
20  icosi  2  di  
30  triaconta  3  tri  
40  tetraconta  4  tetra  
50  pentaconta  5  penta  
60  hexaconta  6  hexa  
70  heptaconta  7  hepta  
80  octaconta  8  octa  
90  enneaconta  9  ennea 
The 'kai' is not always used. Opinions differ on exactly when it should, or need not, be used (see also examples above).
That is, a 42sided figure would be named as follows:
Tens  and  Ones  final suffix  full polygon name 

tetraconta  kai  di  gon  tetracontakaidigon 
and a 50sided figure
Tens  and  Ones  final suffix  full polygon name 

pentaconta  gon  pentacontagon 
But beyond enneagons and decagons, professional mathematicians generally prefer the aforementioned numeral notation (for example, MathWorld has articles on 17gons and 257gons). Exceptions exist for side numbers that are difficult to express in numerical form.
History
Template:Cleanup
Polygons have been known since ancient times. The regular polygons were known to the ancient Greeks, and the pentagram, a nonconvex regular polygon (star polygon), appears on the vase of Aristophonus, Caere, dated to the 7th century B.C..Template:Fix/category^{[citation needed]} Nonconvex polygons in general were not systematically studied until the 14th century by Thomas Bredwardine.Template:Fix/category^{[citation needed]}
In 1952, ShephardTemplate:Fix/category^{[citation needed]} generalised the idea of polygons to the complex plane, where each real dimension is accompanied by an imaginary one, to create complex polygons.
Polygons in nature
Numerous regular polygons may be seen in nature. In the world of geology, crystals have flat faces, or facets, which are polygons. Quasicrystals can even have regular pentagons as faces. Another fascinating example of regular polygons occurs when the cooling of lava forms areas of tightly packed hexagonal columns of basalt, which may be seen at the Giant's Causeway in Ireland, or at the Devil's Postpile in California.
The most famous hexagons in nature are found in the animal kingdom. The wax honeycomb made by bees is an array of hexagons used to store honey and pollen, and as a secure place for the larvae to grow. There also exist animals who themselves take the approximate form of regular polygons, or at least have the same symmetry. For example, sea stars display the symmetry of a pentagon or, less frequently, the heptagon or other polygons. Other echinoderms, such as sea urchins, sometimes display similar symmetries. Though echinoderms do not exhibit exact radial symmetry, jellyfish and comb jellies do, usually fourfold or eightfold.
Radial symmetry (and other symmetry) is also widely observed in the plant kingdom, particularly amongst flowers, and (to a lesser extent) seeds and fruit, the most common form of such symmetry being pentagonal. A particularly striking example is the Starfruit, a slightly tangy fruit popular in Southeast Asia, whose crosssection is shaped like a pentagonal star.
Moving off the earth into space, early mathematicians doing calculations using Newton's law of gravitation discovered that if two bodies (such as the sun and the earth) are orbiting one another, there exist certain points in space, called Lagrangian points, where a smaller body (such as an asteroid or a space station) will remain in a stable orbit. The sunearth system has five Lagrangian points. The two most stable are exactly 60 degrees ahead and behind the earth in its orbit; that is, joining the centre of the sun and the earth and one of these stable Lagrangian points forms an equilateral triangle. Astronomers have already found asteroids at these points. It is still debated whether it is practical to keep a space station at the Lagrangian point — although it would never need course corrections, it would have to frequently dodge the asteroids that are already present there. There are already satellites and space observatories at the less stable Lagrangian points.
Uses for polygons
 Cut up a piece of paper into polygons, and put them back together as a tangram.
 Join many edgetoedge as a tiling or tessellation.
 Join several edgetoedge and fold them all up so there are no gaps, to make a threedimensional polyhedron.
 Join many edgetoedge, folding them into a crinkly thing called an infinite polyhedron.
 Use computergenerated polygons to build up a threedimensional world full of monsters, theme parks, aeroplanes or anything  see Polygons in computer graphics below.
Polygons in computer graphics
A polygon in a computer graphics (image generation) system is a twodimensional shape that is modelled and stored within its database. A polygon can be coloured, shaded and textured, and its position in the database is defined by the coordinates of its vertices (corners).
Naming conventions differ from those of mathematicians:
 A simple polygon does not cross itself.
 a concave polygon is a simple polygon having at least one interior angle greater than 180 deg.
 A complex polygon does cross itself.
Use of Polygons in Realtime imagery. The imaging system calls up the structure of polygons needed for the scene to be created from the database. This is transferred to active memory and finally, to the display system (screen, TV monitors etc) so that the scene can be viewed. During this process, the imaging system renders polygons in correct perspective ready for transmission of the processed data to the display system. Although polygons are two dimensional, through the system computer they are placed in a visual scene in the correct threedimensional orientation so that as the viewing point moves through the scene, it is perceived in 3D.
Morphing. To avoid artificial effects at polygon boundaries where the planes of contiguous polygons are at different angle, so called 'Morphing Algorithms' are used. These blend, soften or smooth the polygon edges so that the scene looks less artificial and more like the real world.
Polygon Count. Since a polygon can have many sides and need many points to define it, in order to compare one imaging system with another, "polygon count" is generally taken as a triangle. A triangle is processed as three points in the x,y, and z axes, needing nine geometrical descriptors. In addition, coding is applied to each polygon for colour, brightness, shading, texture, NVG (intensifier or night vision), InfraRed characteristics and so on. When analysing the characteristics of a particular imaging system, the exact definition of polygon count should be obtained as it applies to that system.
Meshed Polygons. The number of meshed polygons (`meshed' is like a fish net) can be up to twice that of freestanding unmeshed polygons, particularly if the polygons are contiguous. If a square mesh has points (vertices) per side, there are n squared squares in the mesh, or squared triangles since there are two triangles in a square. There are vertices per triangle. Where n is large, this approaches 1/2. Or, each vertex inside the square mesh connects four edges (lines).
Vertex Count. Because of effects such as the above, a count of Vertices may be more reliable than Polygon count as an indicator of the capability of an imaging system.
Point in polygon test. In computer graphics and computational geometry, it is often necessary to determine whether a given point P = (x_{0},y_{0}) lies inside a simple polygon given by a sequence of line segments. It is known as the Point in polygon test.
External links
 Polygon name generator, enter the number of sides to see the polygon's name
 Weisstein, Eric W., "Polygon" from MathWorld.
 What Are Polyhedra?, with Greek Numerical Prefixes
 Polygons, types of polygons, and polygon properties, with interactive animation
 How to draw monochrome orthogonal polygons on screens, by Herbert Glarner
 comp.graphics.algorithms Frequently Asked Questions, solutions to mathematical problems computing 2D and 3D polygons
 Comparison of the different algorithms for Polygon Boolean operations, compares capabilities, speed and numerical robustness
See also
 Constructible polygon
 Cyclic polygon
 Geometric shape
 Polygon triangulation
 Polyform
 Polyhedron
 Polytope
 Regular polygon
 Simple polygon
 Star polygon
 Synthetic geometry
 Tiling
 Tiling puzzle
 Golygon
 Boolean operations on polygons, boolean operations (AND, OR, NOT, XOR, etc.) operating on one or more sets of polygons.
References
 ↑ Polygon Area and Centroid
 ↑ A.M. Lopshits (1963). Computation of areas of oriented figures. D C Heath and Company: Boston, MA.
 ↑ Meditation VI by Descartes (English translation).
 ↑ Geometry Demystified: A Selfteaching Guide By Stan Gibilisco Published by McGrawHill Professional, 2003 ISBN 0071416501, 9780071416504
 Coxeter, H.S.M.; Regular Polytopes, (Methuen and Co., 1948).
 Cromwell, P.;Polyhedra, CUP hbk (1997), pbk. (1999).
 Grünbaum, B.; Are your polyhedra the same as my polyhedra? Discrete and comput. geom: the GoodmanPollack festschrift, ed. Aronov et al. Springer (2003) pp. 461–488. (pdf)
